Ricoh MP 2014AD User Manual

SC Code Descriptions
SM 6-10 D245/D246/D247
SC No. Level Error Name/Error Condition/Major Cause/Solution
351-00 B ID sensor error: Vsg measurement error (detailed)
Only when the following two conditions are met during the ID
sensor detection (only when the SP5-995-001 is set to “1”).
 Vsg is 5V and LED drive current is minimum (PWM=0).
 ID sensor defective
 ID sensor harness damaged.
 ID sensor not connected correctly.
 MPU defective
 Laser unit defective
 Imaging density fault
 HVPS board defective
 Clean the ID sensor
 Replace the ID sensor.
 Replace and reset the ID sensor harness.
 Replace the MPU.
 Replace the HVPS board.
SC No. Level Error Name/Error Condition/Major Cause/Solution
353-00 B ID sensor: Auto adjustment PWM value error (detailed)
One of the following conditions occurs when the ID sensor is
adjusting Vsg automatically, this SC is issued (only when the
SP5-995-001 is set to “1”).
 Vsg is less than 4 V with the LED drive current set to
maximum (PWM=1023).
 Vsg is more than 4 V with the LED drive current set to
minimum (PWM=1).

Ricoh MP 2014AD Specifications

General

Print Technology	Laser
Max Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB 2.0
Dimensions	587 x 581 x 461 mm
Functions	Print, Copy, Scan
Multiple Copy	Up to 99 copies
Paper Input Capacity	250 sheets
Paper Output Capacity	250 sheets
Paper Size	A3, A4, A5, B4, B5
Power Source	220-240V, 50/60Hz
Print Speed	20 ppm
Duplex Printing	Automatic
Fax Transmission Speed	33.6 kbps
Network Connectivity	Optional
Warm-up Time	Less than 31 seconds