Ricoh MP 7503 User Manual

When the LDAP Server Cannot Be Used
Message Cause Solution
"Connection with LDAP
server has failed. Check the
server status."
A network error has
occurred and connection
has failed.
Try the operation again. If the message
is still displayed, the network may be
busy.
Check the settings for LDAP server in
[System Settings]. For details about
settings for LDAP server, see
"Programming the LDAP server",
Connecting the Machine/ System
Settings.
"Exceeded time limit for
LDAP server search. Check
the server status."
A network error has
occurred and connection
has failed.
• Try the operation again. If the
message is still displayed, the
network may be busy.
• Check that the correct settings for
LDAP server are listed in
[Administrator Tools] of [System
Settings]. For details about LDAP
server, see "Programming the
LDAP server", Connecting the
Machine/ System Settings.
"LDAP server authentication
has failed. Check the
settings."
A network error has
occurred and connection
has failed.
Configure settings correctly for the user
name and the password for LDAP
server authentication.
10. Troubleshooting
212

Ricoh MP 7503 Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Monthly Duty Cycle	300, 000 pages
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes
ADF Capacity	220 sheets
Scan Resolution	600 dpi
Memory (RAM)	4 GB
Hard Disk Drive	320 GB
Print Speed	75 ppm
Paper Capacity	4, 300 sheets standard
Scan Speed	120 ipm
Connectivity	Ethernet, USB
Copy Speed	75 ppm (Black)
Zoom Range	25% - 400%
Fax Speed	33.6 Kbps
Interface	USB 2.0, Ethernet
Operating Systems Supported	Windows, Mac, Linux
Power Consumption	1.5 kW