Ricoh MP 7503 User Manual

4. Fax
This chapter describes frequently used facsimile functions and operations. For information not included in
this chapter, see Fax available on our website.
Basic Procedure for Transmissions (Memory
Transmission)
This section describes the basic procedure for transmitting documents using Memory Transmission.
You can specify the fax, IP-Fax, Internet Fax, e-mail, or folder destinations. Multiple types of destination
can be specified simultaneously.
• It is recommended that you call the receivers and confirm with them when sending important
documents.
• If there is a power failure (the main power switch is turned off) or the machine is unplugged for
about one hour, all the documents stored in memory are deleted. As soon as the main power
switch is turned on, the Power Failure Report is printed to help you check the list of deleted files. See
"When an Error Is Notified via a Report or E-Mail", Troubleshooting.
When Using the Fax Application
About how to use the application's screen, see page 43 "[Fax] Screen".
Registering a Fax Destination
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [Address Book Management] icon.
3. Check that [Program / Change] is selected.
4. Press [New Program].
5. Press [Change] under "Name".
The name entry display appears.
6. Enter the name, and then press [OK].
79

Ricoh MP 7503 Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Monthly Duty Cycle	300, 000 pages
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes
ADF Capacity	220 sheets
Scan Resolution	600 dpi
Memory (RAM)	4 GB
Hard Disk Drive	320 GB
Print Speed	75 ppm
Paper Capacity	4, 300 sheets standard
Scan Speed	120 ipm
Connectivity	Ethernet, USB
Copy Speed	75 ppm (Black)
Zoom Range	25% - 400%
Fax Speed	33.6 Kbps
Interface	USB 2.0, Ethernet
Operating Systems Supported	Windows, Mac, Linux
Power Consumption	1.5 kW