Messages Causes Solutions
"Classification Code is
incorrect."
The classification code is not
supported with the printer
driver.
Select [Optional] for classification
code. For details about how to specify
classification code settings, see
"Configuring Classification Codes",
Print.
"Duplex has been
cancelled."
Duplex printing was
canceled.
• Select an appropriate paper size
for the duplex function. For details
about paper, see "Specifications
for the Main Unit", Maintenance
and Specifications.
• Change the setting for "Apply
Duplex" in [System Settings] to
enable duplex printing for the
paper tray. For details about
setting "Apply Duplex", see "Tray
Paper Settings", Connecting the
Machine/ System Settings.
"Exceeded max. pages.
Collate is incomplete."
The number of pages
exceeds the maximum
number of sheets that you
can use Collate with.
Reduce the number of pages to print.
"Output tray has been
changed."
The output tray was
changed because the paper
size of the specified output
tray is limited.
Specify the proper output tray.
"Print overrun." Images were discarded
while printing.
PCL 6
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PostScript 3
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
Messages Displayed When Using the Printer Function
201
To Next Page
Loading...
Need help?
General
