Problem Cause Solution
The function does not run or
cannot be used.
If you cannot carry out your
job, it may be that the
machine is being used by
another function.
Wait until the current job is completed
before trying again.
For details about Function
Compatibility, see "When Multiple
Functions Cannot Be Executed
Simultaneously", Troubleshooting.
The function does not run or
cannot be used.
The function cannot be
performed while the Address
Book is being backed up
from Web Image Monitor or
other tools running on the
computer.
Wait a while. When the Address Book
backup is complete, the function will
be performed.
Paper is bent. Paper may be bent when it is
ejected from the finisher
upper tray.
Change the output tray to the finisher
shift tray.
• There are times when images might not turn out as you want because of paper type, paper size, or
paper capacity problems, use the recommended paper. For details about recommended paper,
see page 168 "Recommended Paper Sizes and Types".
When Multiple Functions Cannot Be Executed Simultaneously
If you cannot carry out your job, it may be that the machine is being used by another function.
Wait until the current job is completed before trying again. In certain cases, you can carry out another
job using a different function while the current job is being performed.
For details about Function Compatibility, see "Function Compatibility", Troubleshooting.
10. Troubleshooting
194
To Next Page
Loading...
Need help?
General
