English
25
English
Introduction
5 Eco Dim the projector lamp which will
lower power consumption and extend
the lamp life.
6 Volume +/- Increase or decrease speaker volume.
7 Video Press “Video” to choose between Video
and S-Video terminal.
8 HDMI Press “HDMI” to choose between
HDMI1/MHL, HDMI2, HDMI3/MHL
terminal.
9 Magnify Zoom in the projector display.
10 Number (0~9) Input numbers.
11 MHL Control Press “MHL Control” to control your
MHL device.
12 Freeze Pause the screen image. Press again to
resume the screen image.
13 Picture Select the preset picture mode.
14 Status Display the projector status.
15 Aspect Use this function to choose your
desired aspect ratio.
16 Digital A Press “Digital A” to choose HDBaseT
terminal.
17 Digital B This function is not supported.
18 Computer Press “Computer” to choose Computer
In terminal.
19 Keystone +/- Adjust the image to compensate
for distortion caused by tilting the
projector.
20 Menu Press “Menu” to launch the On Screen
Display (OSD), back to the top level
of OSD for the OSD main menu
operation. (See page 38)
21 Auto Automatically synchronize the
projector to the input source.
22 AV Mute Momentarily turn off/on the audio
and video.
To Next Page
Loading...
Need help?
General
