English
77
English
Troubleshooting
Problem: The screen of the Notebook computer is not
displaying a presentation
If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or ickering
Adjust the “Phase” or “Clock” to correct it. Refer to the
“H. Position” or “V. Position” section for more information.
Check and recongure the display mode of your graphic card to
make it compatible with the product.
Problem: Image is out of focus
Adjust the Focus Ring on the projector lens.
Make sure the projection screen is between the required distance.
(refer to pages 34~37)
Problem: The image is stretched when displaying 16:9 DVD
Change the aspect ratio by pressing the “Aspect” button on the
remote control or select “SCREEN > Aspect Ratio” from the OSD
menu to show image with proper aspect ratio.
Problem: Image is too small or too large
Adjust the Zoom lever on the top of the projector.
Move the projector closer to or further from the screen.
Press the “Aspect” button on the remote control or press the
“Menu” button on the projector panel, go to “SCREEN > Aspect
Ratio” and try the different settings.
Problem: Image is reversed
Select “SCREEN > Projection Mode” from the OSD menu to
adjust the image.
To Next Page
Loading...
Need help?
General
