Ricoh Pentax K-3 III User Manual

3
Shooting
60
You can set the autofocus operation
when shooting with the viewfinder in
[AF with Viewfinder] of the A1 menu.
t Memo
• The [AF Mode] and [AF Active Area] setting can be changed
by pressing b and then turning Q or R. (p.60)
1 Press b, and then turn
Q.
You can select the AF points.
The AF points can be selected from 41 points out of 101 points.
1 Press b, and then turn
R.
Setting the Autofocus when Shooting
with the Viewfinder
A1
AF Mode
Single AF
When 0 is pressed halfway and
the subject comes into focus, the
focus is locked at that position.
The AF assist light turns on as necessary.
Continuous
AF
The subject is kept in focus by
continuous adjustment while 0
is pressed halfway.
The shutter can be released even if
the subject is not in focus.
AF with Viewfinder
AF Mode
AF Active Area
AF Area Restriction
O
AF.S Setting
1st Frame Action in AF.C
Action in AF.C Cont.
1 /
1/
250
250
1600
F
F
5.6
5.6
SR
9 9 9 9
9999
9 9 9 9
9999
AF Active Area (AF Point)
Auto Area
Automatically selects the optimum
focusing points out of all AF points.
Zone Select
Automatically selects the optimum
focusing points out of the selected
21 AF points.
Select
Sets the AF points to the user
selected five points.
Expanded
Area AF (S)
Sets the AF points to the user
selected five points.
When the subject happens to move
out of the selected AF points after
being focused, 16 peripheral points
are used as back-up points for
autofocus.
This setting is available only with
[Continuous AF].
Expanded
Area AF (M)
Sets the AF points to the user
selected five points.
When the subject happens to move
out of the selected AF points after
being focused, 60 peripheral points
are used as back-up points for
autofocus.
This setting is available only with
[Continuous AF].
1 /
1/
250
250
1600
F
F
5.6
5.6
SR
9 9 9 9
9999
9 9 9 9
9999

Ricoh Pentax K-3 III Specifications

General

Brand	Ricoh
Model	Pentax K-3 III
Category	Digital Camera
Language	English