Ricoh Pro C7100 Technical Bulletin

Technical Bulletin PAGE: 1/2
Model: Vacuum Feed LCIT RT5100
Date: 2-Mar-16
No.: RD777006
Subject: Troubleshooting non-feed from Vacuum Feed LCIT RT5100
with grain long paper
Prepared by: Hiroaki H Matsui
From: 1st Tech Service Sect., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other ( )
Tier 2
Tier 0.5
SYMPTOM
Non-feed jam occurs with the last few sheets of the stack that remain on the paper feed
tray when fed from the Vacuum Feed LCIT RT5100, if the paper is grain long (the grain of
the paper is parallel to the paper’s long side) and Weight 8 (300.1~350.0 gsm).
CAUSE
The above type of paper tends to get caught between the spring [A] of the end fence and
the paper stopper plates [B], and does not float up.

Ricoh Pro C7100 Specifications

General

Brand	Ricoh
Model	Pro C7100
Category	Printer
Language	English