Scanner Problems
Problem Solution
The scanned image is dirty. • The scanning part is dirty.
• Before placing originals on the exposure glass, make
sure that toner or correction fluid is dry.
The scanned image is distorted or
out of position.
The original was moved during scanning. Do not move the
original during scanning.
The scanned image is upside down. The original was placed upside down. Place the original in the
correct orientation. See page 54 "Placing Originals".
The scanned image is blank. The original was placed with the front and back reversed.
The scanned image is too dark or
too light.
Adjust the image density.
10. Troubleshooting
222 opal-p2_mf2_com_user_guide_00142154_eng.xml
To Next Page
Loading...
Need help?
General
