Message Causes Solutions
"Replcmnt Requrd Drum
Unit"
You need to replace the
drum unit.
For details, see "Replacing Drum Unit",
Maintenance and Specifications .
"Repl Requrd Soon Maint.
Kit"
You will need to replace the
maintenance kit soon.
Contact your sales or service
representative to obtain a new unit.
"Rplcmnt Rqrd Soon:Drum
Unit"
You will need to replace the
drum unit soon.
Contact your sales or service
representative to obtain a new unit.
"Set the Drum Unit correctly." The drum unit may not be
installed correctly.
Turn the machine off, and then install
the drum unit again.
"Set the Maintenance Kit
correctly."
The fusing unit may have not
been installed correctly.
Turn the machine off, and then install
the fusing unit again.
If the message continues to appear
after the unit is installed again, contact
your sales or service representative.
"Set the Toner Cartridge
correctly."
The print cartridge may have
not been installed correctly.
Turn the machine off, and install the
print cartridge again.
"Supply order has failed." The automatic supply order
failed.
The message indicates the machine
tried to order the supplies.
"Waste Toner almost full" The print cartridge must be
replaced when the life of the
waste toner is ending.
Prepare a new print cartridge.
"Waste Toner full" The waste toner is full. Replace the print cartridge. For details,
see "Adding Toner", Maintenance and
Specifications .
Messages Displayed When Using the Scanner Function
This section describes likely causes of and possible solutions for the error messages that appear on the
control panel. If a message not described here appears, act according to the message.
9. Troubleshooting
110
To Next Page
Loading...
Need help?
General
Weight and Dimensions
