Common Problems
This section explains how to troubleshoot common problems that may occur while operating the
machine.
Problem Possible cause Solution
The machine does not turn on. The power cord is not
connected properly.
• Make sure that the power
plug is firmly inserted into
the wall outlet.
• Make sure that the wall
outlet is not defective by
connecting another
working device.
An error message appears on
the machine's screen.
An error has occurred. See page 172 "Error & Status
Messages on the Control
Panel".
The red indicator is lit. An error has occurred. See page 176 "Panel
Indicator".
Pages are not printed. The machine is warming up or
receiving data.
Wait until "Printing..." appears
on the screen. If "Processing..."
is displayed on the screen, the
machine is receiving data.
Pages are not printed. The interface cable is not
connected correctly.
• Reconnect the cable.
• Check that the interface
cable is the correct type.
Strange noise is heard. • The supplies or options are
not properly installed.
• The machine executes
periodic cleaning of the
interior when [Auto
Cleaning] in [System] is set
to [On].
Check if the supplies or options
are properly installed.
The noise does not indicate a
malfunction. Wait until the
cleaning is complete.
• If any of these problems persist, turn off the power, pull out the power cord, and contact your sales
or service representative.
Common Problems
157
To Next Page
Loading...
Need help?
General
Weight and Dimensions
