RIGOL
DS1000Z Quick Guide
User Interface
DS1000Z provides 7.0 inch WVGA (800*480) TFT LCD.
Figure 12 User Interface
1. Auto Measurement Items
Provide 20 horizontal (HORIZONTAL) and 17 vertical (VERTICAL) measurement
parameters. Press the softkey at the left of the screen to activate the
corresponding measurement item. Press MENU continuously to switch between
the horizontal and vertical parameters.
2. Digital Channel Label/Waveform
The logic high level of the digital waveform is displayed in blue and the logic low
level in green. Its edge is displayed in white. The label and waveform of the
digital channel currently selected are displayed in red. The group set function in
logic analyzer menu can divide the digital channels into four groups, channel
labels in the same group are marked with the same color and labels in different
groups are marked with different colors.
Note: This function is only applicable to DS1000Z Plus with the MSO upgrade
option.
12 13 14 15 16 17 18 19 20 21 22
To Next Page
Loading...
Need help?
General
