ring Range Extender Z-Wave User Manual

2
Ring Range Extender
Description and Features
The Ring Extender is a Z-Wave range extender with battery backup. It is a Security Enabled Z-Wave
Plus Product, and requires a security-enabled Z-Wave Plus controller to make use all of its features.
It will repeat Z-Wave commands from all nodes in the network, from any certified Z-Wave device
manufacturer. Any non-battery powered Z-Wave device will also repeat signals in a Z-Wave network.
SmartStart
SmartStart enabled products can be added into a Z-Wave network by scanning the Z-Wave QR Code
present on the product with a controller providing SmartStart inclusion. No further action is required
and the SmartStart product will be added automatically within 10 minutes of being switched on in the
network vicinity.
QR Code and DSK Label
The DSK is a unique identifier for the device used for SmartStart inclusion. The QR Code and DSK label
is shown on the outside packaging of the box. The full DSK string is also located in the leaflet inside
the packaging. The same DSK is printed in the form of a QR code on the back of the device as well.

ring Range Extender Z-Wave Specifications

General

Brand	ring
Model	Range Extender Z-Wave
Category	Extender
Language	English