ring Range Extender Z-Wave User Manual

3
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other
manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor
to increase reliability of the network.
This is a SmartStart enabled product which can be added into a Z-Wave network by scanning the
Z-Wave QR Code present on the product with a controller providing SmartStart inclusion. No further
action is required and the SmartStart product will be added automatically within 10 minutes of being
switched on in the network vicinity. This product can also be operated in any Z-Wave network with other
Z-Wave certified devices from other manufacturer.
Technical Specifications
Radio protocol Z-Wave(500 series)
Z-Wave SDK 6.81
Encryption S2 (using 64-character hex device-specific ID)
Power Supply AC 110V 60 hz
Battery Specs 3.7V DC 1100mAh
Battery Life 22 Hours
Working current Max: 20 mA
Operating temperature 14 - 122 °F (-10 - 50 °C)
Radio frequency 908.4 MHz US
Z-Wave Range 250’ +
LED Color Blue
Package Contents Extender, Battery, Set-Up Guide
Certifications FCC, IC, Z-Wave +, RoHS, WEEE, ETL based on UL60950
Certifications (future)
(Tested by ETL)
UL 1023 Standard for Household Burglar-Alarm System Units
UL 985 Standard for Household Fire Warning System Units
UL 1635 Standard for Digital Alarm Communica- tor System Units
UL 94 Standard for Safety of Flammability of Plas- tic Materials for Parts in Devices
and Appliances
ULC 1023 Preliminary Standard For Household Burglar Alarm System Units
Dimensions
Including notch excluding plug: 89.6X47X29.4mm Excluding notch and plug:
81X47X29.4mm
Button Action button

ring Range Extender Z-Wave Specifications

General

Brand	ring
Model	Range Extender Z-Wave
Category	Extender
Language	English