ring Range Extender Z-Wave User Manual

4
Color Event Behavior
Blue
In Pairing Mode Long Blink pattern repeated indefinitely or until paired
Paired successfully LED O
Device powers on
(and enters inclusion mode)
Long Blink pattern repeated indefinitely or until paired
Factory Reset Flash 250ms on / 250ms o repeat 10 times
Enter Exclusion Mode
5 short blinks upon exclusion, then “Device is not yet
paired” pattern resumes after exclusion
Action Condition Result
Power On
Range Extender Not Yet Included in System,
and Controller is in Inclusion Mode
Device enters smart start (inclusion) mode.
Range Extender Already Included in System Device powers on.
Push Button once
(short press)
Range Extender Already Included in System Device sends node info to Group 1
Range Extender Already Included, and
Controller is in Exclusion Mode
Device is excluded from the system and re-
moves the Home ID from its memory
Range Extender Not Yet Included in System
Device cancels Smart Start and enters regular
(S2) inclusion mode indefinitely and includes
into whichever network is also in inclusion
mode.
Press and hold the
button for TEN
seconds
Range Extender Already Included in System
Device will be reset to factory settings, and a
DEVICE_RESET_LOCALLY command will be
sent to Group 1
Any condition (as long as the
device has power)
The device’s memory will erase to factory
default settings and any associations, configu-
ration parameters, and other locally saved data
will be lost
Short blink = 500ms on + 500ms o Long blink = 1s on + 1s o
Inclusion & Exclusion
SmartStart Inclusion (Add to System) - SmartStart:
1. For proper inclusion, bring the Range Extender to the final location where it will be used*.
2. Follow the instructions provided in Ring Alarm Mobile Application, scan QR code to
enter inclusion mode.
3. Supply power to the Range Extender to begin Smart Start (inclusion) mode.
4. The device will enter inclusion mode indefinitely and the LED Indicator will blink slowly
(1 flash/2 sec) until it’s included in a system.
5. Upon successful inclusion, the LED Indicator will stop blinking.

ring Range Extender Z-Wave Specifications

General

Brand	ring
Model	Range Extender Z-Wave
Category	Extender
Language	English