7
Bypass Unit mode
For units configured by engineers as being in bypass mode, the actions keys are
disabled and the keypad is used only to authorize an opening of an exit/entry door. The
following explanation details the user operations from the 2-way wireless slim outdoor
keypad in bypass unit mode.
User Operation
When the system is armed, a user must get access using the keypad to open the door.
Opening a door without an approval from the main unit will cause an immediate
intruder alarm.
Granted Access to Open Entry Door
1. Before opening an entry door enter an authorized code
a
in the keypad or wake
up the keypad by pressing and present a proximity tag
b
.
2. Once access is granted (Green Led On) the user has a time window
c
to open the
front door.
3. Once the front door is opened entry time will start in which the security system
needs to be disarmed.
Notes:
a. Bypass code can be unique or the same code as the security code. Ask your engineer for the code
definition.
b. An incorrect keypad code entered five times locks it for one minute
c. Ask your engineer for the defined time window.
BUZZER INDICATION
Duration Operation
Long beep Confirmation
3 short beeps Wrong code
Pulsed beeps Exit/Entry beeps (programmable)
Short beep Each key press
REPLACING BATTERIES
1. Remove the unit from the wall.
2. Remove the battery compartment cover screw located at the bottom of the cover by
turning screw counter clockwise.
3. Pull up the battery compartment cover.
To Next Page
Loading...
Need help?
General