cobas c 111 Installation Manual
04906900001
INSTALLATION-MANUAL cobas c 111
Version 3.0 Page 42 of 43
10. Disposal of the instrument
If the instrument is to be scrapped then all parts maybe disassembled according to the
procedures in the service manual to allow separate disposal of differing materials
according to local regulations.
î The instrument must be treated as biologically contaminated-
hazardous waste. Final disposal must be organized in a way that does
not endanger the waste handlers. As a rule, such equipment must be
sterile before it is passed on for final disposal.
For more information contact your Local Safety Officer.
10.1 Disposal of external components
External components such as the scanner and the ISE power supply,
which are marked with the crossed-out wheeled bin symbol, are
covered by the European directive 2002/96/EC (WEEE)
These items must be disposed of via designated collection facilities
appointed by government or local authorities.
(WEEE) Directive 2002/96/EC of the European Parliament and the Council of 27 January 2003 on waste
electrical and electronic equipment
For more information about disposal of your old products, contact your city office,
waste disposal service or your Local Safety Officer.
Constraint: It is left to the responsible laboratory organization to determine whether
control unit components are contaminated or not. If contaminated, treat in the same
way as the instrument.
11. Installation Report Form
For Field Service Engineer: Your feedback is needed!
Please fill in the Installation Report and send it back to the Customer Support Team
by Fax: ++41 41 798 72 18
by Mail: Roche Diagnostics Ltd.
GSS cobas c 111
Forrenstrasse
CH-6343 Rotkreuz
Switzerland
by E-Mail: rotkreuz.gsscdiric@roche.com
To Next Page
Loading...
Need help?
General
