5 of 136
Before You Begin
Please review the following information before starting this lab.
About this lab
Learn the basics of drive configuration and programming using the PowerFlex 525 compact AC drive and the PowerFlex 755 AC
Drive. Attendees will configure these drives using the Human Interface Module (HIM), Connected Components Workbench
software and Studio 5000™ Logix Designer software. You will also try out AppView, a feature that provides specific parameter
groups for popular applications for the PowerFlex 525 AC Drive. The third lab exercise shows how Premier Integration™
enhances the use of PowerFlex AC drives with ControlLogix® and CompactLogix™ controllers and other Allen-Bradley®
products. In that exercise, you will see how to save time and money during system development, operation, and maintenance. If
you have extra time, learn about the new Automatic Device Configuration (ADC) feature for PowerFlex 750-Series and
PowerFlex 520-Series drives in Studio 5000.
Lab layout
This PowerFlex lab is broken into sections to allow user to “choose own adventure.” One can start with either Lab 1: PowerFlex
525 AC Drive Programming & Configuration or Lab 2: PowerFlex 755 AC Drive Programming & Configuration. Lab 3: Drive Add-
On Profile with Drives and Motion Accelerator Toolkit is the premier integration of the drives using Studio 5000 Logix designer.
Premier Integration
Add-On Profiles with DMAT
PowerFlex 525 AC Drive
Programming & Configuration
PowerFlex 755 AC Drive
Programming & Configuration
To Next Page
Loading...
Need help?
General
