30
Preparing a CD
(continued)
1
Press the [EJECT( )] button.
After the CD has been ejected, pull it all the way out.
fig.CD04.eps
fig.finalize-mssg01.eps
If the CD-R/RW disc has not been finalized, a message
will ask “Finalize Are You Sure?” If you don’t want to
finalize the disc for playing on other CD players, press the
[EXIT] button and remove the disc after it’s been ejected.
For details on finalizing, refer to “Making a CD-R/RW Disc for Playback on Another CD
Player (Finalize)” (Page 99).
Removing a CD
If the screen shows “Finalize Are You Sure?”
Finalize
Response
Yes
Press the [ENTER] button.
The CD-RW disc will be finalized and then ejected.
No
Press the [EXIT] button.
The CD-R/RW disc will be ejected.
If pressing the [EJECT ] button does not eject the disc, you can use the emergency
eject hole to forcibly eject the CD.
* Before using the emergency eject hole to eject the CD, you must turn off the power of the CD-
2u/SD-2u.
1 Turn off the power (☞ Page 23).
2 Insert a thin wire (such as a straightened
paper clip) into the emergency eject hole.
Insert and remove the wire repeatedly until the CD
comes out.
If You are Unable to Eject the Disc
CD-2u_SD-2u_e.book 30 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
