83
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
Tuning Your Instrument (Tuner Function)
You can tune your instrument using the chromatic tuner function, which detects the name of
the note in semitone steps.
1
Select the internal mics.
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “MIC Select.”
fig.menu-overdub-e.eps
Press the [ENTER] button to confirm your choice.
Use the [+] [-] buttons to change the value to select “Internal.“
2
Press the [EXIT] button twice.
You’re returned to the audio source screen.
3
Press the [MENU] button to access the menu screen, and choose “Tuner/
Tone?”
fig.menu-tuner01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Tuner/Tone?”
Press the [ENTER] button to confirm your choice.
4
Watch the tuner screen, and play a note on the instrument you want to
tune.
fig.menu-tuner02-e.eps
The name of the note closest to the pitch you played will
appear in the tuner screen. Tune your instrument so that
the desired note name appears.
If the tuner does not respond, make sure that the [MIC]
knob’s level is raised.
Note Name
You can press the [TUNER] button to access the screen of step 4.
Important
CD-2u_SD-2u_e.book 83 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
