84
Tuning Your Instrument (Tuner Function)
(continued)
5
Tune the instrument so that the left and right tuning guides are both
displayed.
When your instrument is within ±50 cents of the correct pitch, a tuning guide will
appear in the screen. This indicates the distance between the displayed note name and
the pitch your instrument is actually producing.
fig.menu-tuner03-e.eps
Tune your instrument so that the left and right guides are
visible.
6
When you’re finished using the tuner, press the [EXIT] button twice.
You’re returned to the audio source screen.
You can calibrate the CD-2u/SD-2u’s Tuner to another instrument or tuning standard by
adjusting its “reference pitch.”
The reference pitch is the frequency of the A4 note. This is the pitch of the middle A note
on a piano.
1
Press the [MENU] button to access the menu screen, and choose “Tuner/
Tone?”
fig.menu-tuner01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Tuner/Tone?”
Press the [ENTER] button to confirm your choice.
When only the right guide is displayed: When only the left guide is displayed:
The pitch is above the displayed note
name (i.e., sharp).
The pitch is below the displayed note
name (i.e., flat).
Changing the Tuner’s Reference Pitch
Tuning guides
●
The tuner can also use the external mics. When you want to use the external mics, choose
MIC SELECT from the menu, then set it to “External.“
☞ “Select the External mics.” (Page 46)
●
You can’t play back or record while using the tuner.
●
If you don’t want to hear sound while you’re tuning, you can turn down the [VOLUME]
knob or turn the speakers off so that the sound is muted.
Important
CD-2u_SD-2u_e.book 84 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
