48
Recording Acoustic Instruments or Vocals
(continued)
You can set the sensitivity as appropriate for the external mic you’re using.
1 Press the [MENU] button to access the menu screen, and choose “EXT
MIC Sens.”
fig.menu-micsens02.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “EXT MIC
Sens.”
Press the [ENTER] button to confirm your choice.
2 Use the [+] [-] buttons to change the external mic sensitivity setting.
3 Press the [EXIT] button twice.
You’re returned to the audio source screen.
Selecting the External Mic Sensitivity
Value Explanation
Low
Lowers the sensitivity of the external mic.
If the movement of the level meter does not decrease when you adjust the
input level, select the “Low” setting. This is appropriate for a condenser mic.
High
(factory setting)
Raises the sensitivity of the external mic.
If the movement of the level meter does not increase when you adjust the
input level, select the “High” setting. This is appropriate for a dynamic mic.
CD-2u_SD-2u_e.book 48 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
