Convenient Functions for Recording
(continued)
63
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
When you make settings for automatic recording, the procedure for starting to record will be
as follows.
1
Press the [ ] (Record) button.
fig.autorec01-e.eps
2
Press the [ ] (Play) button.
The CD-2u/SD-2u will be in recording-standby mode.
fig.autorec02-e.eps
3
Start performing.
When the CD-2u/SD-2u detects audio, recording will begin automatically.
* In order to avoid losing any audio at the beginning of the performance, recording will actually
begin up to 0.5 seconds earlier than the point at which audio exceeding the specified level is
detected.
4
Press the [ ] (Stop) button to stop recording.
The recorded song will be added to the SD memory card or to the end of the CD-R/RW
disc.
Blinking
Blinking
●
Recording will pause when you press the [ ] (Play) button. When audio is detected
once again, recording will begin automatically. The point at which recording is resumed
will be the next song.
●
Automatic recording will not work if you’ve specified a count-in (Page 68).
Important
CD-2u_SD-2u_e.book 63 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
