Roland FANTOM-08 User Manual

6
Placing This Unit on a Stand
Be careful not to pinch your ngers when setting up the stand. Place the instrument on the stand as follows.
* When using the KS-10Z, ensure that the height of the unit is one meter or lower.
If You’re Using the FANTOM-06/FANTOM-07
If you want to place the FANTOM-06/FANTOM-07 on a stand, please use the KS-12, KS-10Z or KS-20X stands manufactured by Roland.
* The illustration shows the FANTOM-06.
KS-10Z
Align the front of the
FANTOM with the
front of the stand
Adjust the width of the stand so that the
stand arms are lined up between the
rubber feet of the FANTOM.
Top view
KS-12
Adjust the horizontal width of the
stand so that the rubber feet on the
keyboard side of the FANTOM t
into the holes that are provided to
accommodate them.
Top view
KS-20X
Line up the
FANTOM so that
it rests on the
rubber rings of
the stand.
FANTOM-06:
Open up the stand from closed
position past the fourth stop (with the rst stop
being the closed position, and the fth stop being
the fully open position).
FANTOM-07:
Open up the stand from closed
position past the fth stop (with the rst stop
being the closed position, and the sixth stop being
the fully open position).

Roland FANTOM-08 Specifications

General

Bit rate	24 bit
Pitch wheel	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Reverberation
Sound effects quantity	16
Chorus effects quantity	9
Keyboard number of keys	88
Preset programs quantity	10
Maximum polyphony (notes)	8
Reverberation effects quantity	7
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	AC

Weight and Dimensions

Depth	354 mm
Width	1393 mm
Height	138 mm
Weight	14800 g