Roland FANTOM-08 User Manual

Placing This Unit on a Stand
7
If You’re Using the FANTOM-08
If you want to place the FANTOM-08 on a stand, please use the KS-12, KS-10Z, KS-G8B, or KS-20X stands manufactured by Roland.
KS-10Z
Adjust so that the
height does not
exceed 1 meter.
Adjust the width of the stand so that the
stand arms are lined up between the
rubber feet of the FANTOM.
Top view
Align the front
of the FANTOM
with the front of
the stand
KS-12
Adjust the horizontal width of the
stand so that the rubber feet on the
keyboard side of the FANTOM t
into the holes that are provided to
accommodate them.
Top view
KS-G8B
Align the front of the
FANTOM with the
front of the stand’s
upper arm.
Align the center of the FANTOM
with the center of the stand.
KS-20X
Line up the FANTOM
so that it rests on the
rubber rings of the
stand.
Open up the stand from closed position past
the fourth stop (with the rst stop being the
closed position, and the fth stop being the
fully open position).

Roland FANTOM-08 Specifications

General

Bit rate	24 bit
Pitch wheel	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Reverberation
Sound effects quantity	16
Chorus effects quantity	9
Keyboard number of keys	88
Preset programs quantity	10
Maximum polyphony (notes)	8
Reverberation effects quantity	7
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	AC

Weight and Dimensions

Depth	354 mm
Width	1393 mm
Height	138 mm
Weight	14800 g