Roland FC-300 User Manual

34
Patch Mode
1
In the Patch Mode’s top screen, press PARAMETER [ ].
2
Use the PARAMETER [ ] and [ ] buttons to select the MIDI stream you
want to edit, then press [WRITE].
3
“Edit MIDI” appears in the screen; press [WRITE].
The screen for selecting the MIDI stream editing function appears.
The following display appears when the message is not assigned.
4
Use the VALUE [ ] and [ ] to select the message number for the message
to be edited.
If you are adding any message, press [INS]. The message is added before the number
of the currently selected message.
To delete a message, select the message number with VALUE [ ] [ ] then press
[DEL].
5
Use the following procedures to edit the MIDI stream for different types of
messages.
Editing MIDI Streams
Message Number
You can select only one point
to which no messages at all are
assigned.
FC-300_e1.book 34 ページ ２００７年４月２４日 火曜日 午前１０時１０分

Roland FC-300 Specifications

Materials

front cloth material	Nylon
inside core material	polyurethane

Weight and Dimensions

dimensions	585 (W) x 210 (D) x 280 (H) mm 23-1/16 (W) x 8-5/16 (D) x 11-1/16 (H) inches
weight	1240 g / 2 lbs 12 oz