Roland FC-300 User Manual

51
Other Features
This sets the modes that can be selected when the mode is switched with a pedal.
This setting allows you to toggle only between the modes you need when using the
pedal.
1
Press PARAMETER [ ] [ ] to select “SYS:MODE Pdl Seq.”
2
Press PARAMETER [ ] [ ] to select the mode you want to set, then press
VALUE [ ] [ ] to make the setting.
3
When you’ve finished making the settings, press [UTILITY] or [EXIT].
You can have all unlit pedal indicators flash faintly instead.
This makes it easier to locate pedal positions on stage and in other darkened
environments.
1
Press PARAMETER [ ] [ ] to select “SYS:Pdl Indicate.”
2
Press VALUE [ ] [ ] to make the setting.
3
When you’ve finished making the settings, press [UTILITY] or [EXIT].
Switching the Function of the MODE Pedal Jack
Value
Explanation
Uppercase letters
These can be selected by pressing the pedal.
Lowercase letters These cannot be selected by pressing the pedal.
Switching How the Pedal Indicators Light
Value
Explanation
OFF
All pedal indicators other than the lit pedal indicator remain off.
ON All pedal indicators other than the unlit pedal indicator flash.
The actions performed by
simultaneously pressing the
[ ] and [ ] pedals also
conform to this setting.
Standard Mode Patch Mode
Control Change
Mode
System Exclusive
Mode
You cannot set the lower case
letters in all modes.
FC-300_e1.book 51 ページ ２００７年４月２４日 火曜日 午前１０時１０分

Roland FC-300 Specifications

Materials

front cloth material	Nylon
inside core material	polyurethane

Weight and Dimensions

dimensions	585 (W) x 210 (D) x 280 (H) mm 23-1/16 (W) x 8-5/16 (D) x 11-1/16 (H) inches
weight	1240 g / 2 lbs 12 oz