Roland HP504 User Manual

Panel Descriptions
Phones Jacks
Here you can connect stereo headphones.
The HP506 has two headphone jacks, two people can
also use headphones simultaneously.
Input jack
If a digital audio player or other audio
playback device is connected here,
you’ll be able to listen to its playback
through the HP506.
The volume of the device connected
to the Input jack can be adjusted by
means of Input Volume (p. 50).
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
* When connection cables with resistors are used, the volume level of equipment connected to the Input jack may be low. If this happens, use connection cables that do
not contain resistors.
DC In Jack
Connect the
included AC
adaptor here.
* Before making this connection,
you must make sure that the
[Power] switch is o.
Pedal Connector
Connect the
pedal cord
of the dedicated stand to
this connector.
page 66
page 66
Output Jacks
If you connect these jacks to
amplied speakers, the sound of
HP506 will be heard through them.
* Before turning o the power of the
unit, you must rst turn o the power
of the devices that are connected to the
Output jacks.
Rear side
Rear Panel and Bottom Panel (HP506)
A Headphones 3D Ambience eect will be applied,
producing the sensation that the sound is emanating
from the piano itself even when using headphones.
* The Headphones 3D Ambience eect applies only to piano sounds; it does
not apply to other sounds.
* You can also turn the Headphones 3D Ambience eect o (p. 48).
* You can use the [Ambience] button to adjust the Headphones 3D Ambience
eect.
11
Operation Guide Panel Descriptions Before You Play Performing Practicing
Convenient Functions
Appendix
Function Mode

Roland HP504 Specifications

General

Brand	Roland
Model	HP504
Category	Musical Instrument
Language	English