Roland R-1000 Guide

3
Use in Connection with the V-Mixer
You can record the output of your V-Mixer by connecting the R-1000 to the REAC SPLIT jack of your V-Mixer. In this scenario you
will also need to connect the MIDI IN and MIDI OUT cables as shown.
fig.rec-split-out.eps
The sampling rate of your R-1000 recording project must match the sampling rate of your V-Mixer. If the sampling rates are not matched, your
recording will not work properly.
Recording Output from the V-Mixer on the R-1000
A B SPLITM-480
S-1608 S-1608
STAGE
FOH (Front of House)
40ch
REAC Split Device
REAC Master Device
REAC
Slave
Device
REAC
Slave
Device
A
MIDI
OUT/THRU
MIDI IN
MIDI
OUT/THRU
MIDI
IN
MTC Output
MIDI OUT/THRU
: ON
: OUT

Roland R-1000 Specifications

General

Brand	Roland
Model	R-1000
Category	Recording Equipment
Language	English