Roland V-combo VR-09 Reference Manual

Getting Ready
10
Placing This Unit on a Stand
Be careful not to pinch your ngers when setting up the stand.
If you place this unit on a stand, you must use the KS-18Z or the KS-12.
Place the instrument on the stand as follows.
* If using a pedalboard (PK-9; sold separately), please use the KS-12.
KS-18Z
Align the front of this
unit with the front of
the stand
Adjust so that
the height does
not exceed 1
meter (Adjust
the stand to a
level no higher
than the fth
level from the
bottom)
Adjust the width of the stand so
that the rubber feet of this unit
straddle the stand
Top view
* The illustration shows the VR-09.
KS-12
Adjust the width of the stand
so that the rubber feet on the
keyboard side of the bottom of
the keyboard t into the holes
provided for the rubber feet.
Top view
* The illustration shows the VR-09.

Roland V-combo VR-09 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Compression, Delay, Overdrive, Reverberation
Sound effects quantity	223
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6
Headphone outputs	1
6.35 mm (1⁄4-inch) output	2
Battery type	AA
Operating time	5 h
Power source type	AC, Battery
Number of batteries supported	8

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	106 mm
Weight	5500 g