Roland V-combo VR-09 Reference Manual

Detailed Settings for All Functions (Menu)
49
Category Parameter Value Explanation
Controller
Damper Part
Selecting the Part(s) Aected by the Damper Pedal (Damper Part)
You can select the part(s) to which the damper pedal will apply. However, this does not apply to a drum kit.
to ALL The eect will be applied to the upper part and the lower part.
to LOWER The eect will be applied to the upper part.
to UPPER The eect will be applied to the lower part.
Expression Assign
Changing the Function of the Expression Pedal (Expression Assign)
You can select the function that’s assigned to the expression pedal or the pedal switch connected to the EXPRESSION PEDAL jack.
EXPRESSION Use as a damper pedal.
REGISTRATION SHIFT Switch consecutively through registrations.
LOOPER Control the looper function (p. 38).
ROTARY FAST/SLOW Switch the rotary speed between “FAST” and “SLOW.”
RHYTHM START/STOP Start/stop the rhythm pattern (p. 33).
SONG START/STOP
Same function as the [
] (START/STOP) button.
Expression Part
Selecting the Part(s) Aected by the Expression Pedal (Expression
Part)
You can select the part(s) that will be aected when you operate the expression pedal.
to ALL The eect will apply to all parts.
to UPPER/DUAL1 (*1) The eect will apply to the upper part if using Split, or to part 1 if using Dual.
to LOWER/DUAL2 (*1) The eect will apply to the lower part if using Split, or to part 2 if using Dual.
Expression Curve
Adjusting the Depth of the Expression Pedal (Expression Curve)
This species the response of the expression pedal.
1
Rhythm pattern
Keyboard
performance
The expression pedal will not aect the rhythm pattern
very much.
This setting is useful when you don’t want the volume of
the rhythm pattern to change very much.
2
Rhythm pattern, Keyboard performance
The expression pedal will have the same eect on the
rhythm pattern as on your keyboard performance.
Since the volume will change signicantly as you vary the
angle of the expression pedal, this setting is appropriate for
songs with signicant and clear-cut dynamics.
3
Rhythm pattern, Keyboard performance
The expression pedal will aect the rhythm pattern and
your keyboard performance in the same way.
Since the degree of expression is more gentle than setting
2, this setting is appropriate for quieter songs that do not
have intense dynamic variation.
4
Rhythm pattern
Keyboard
performance
The expression pedal will not aect the rhythm pattern at
all.
This setting is useful when you are performing with
multiple instruments, such as in an ensemble.
Pitch Bend Range
Specifying the Pitch Bend Range (Pitch Bend Range)
This species the pitch bend range (maximum amount of change) (semitone steps, 1 octave).
1–12
For details about how to make menu
settings, see p. 45.
*1: Does not applied to a drum kit.
Introduction Performing Recording Looper Settings
Appendix

Roland V-combo VR-09 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Compression, Delay, Overdrive, Reverberation
Sound effects quantity	223
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6
Headphone outputs	1
6.35 mm (1⁄4-inch) output	2
Battery type	AA
Operating time	5 h
Power source type	AC, Battery
Number of batteries supported	8

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	106 mm
Weight	5500 g