Roland V-Synth GT Supplementary Manual

35
Delete Unneeded Files (Clean Project)
This lets you clean up the contents by deleting files that cannot be used by the V-Synth GT or waves that are not used
by tones. Executing this operation can increase the free space available on the memory. This operation can also be
used to renumber the patches/tones/waves so that any numbers that weren’t being used are put to use, thus
bringing up the slack.
1.
Press [UTILITY] button.
2. Touch <Project>.
3.
Touch <Clean Project>.
fig.ProjectMenu3.eps
The Clean Project screen appears.
fig.CleanProject.eps
4.
Touch the check boxes to choose what the Clean Project command is to do.
5.
Touch <EXECUTE> to execute the operation.
Check box
Description
Keep unused user waves.
Check this box if you want to keep all the waves you’ve sampled or imported from an
external device (user waves).
Keep unused user tones. Check this box if you want to keep all user tones.
Keep tone numbering.
Check this box if you don’t want tones to be renumbered to fill up any unused tone
numbers.
Keep patch numbering.
Check this box if you don’t want patches to be renumbered to fill up any unused patch
numbers.
V-Synth_GT_v2_e1.book 35 ページ ２００８年１２月１７日 水曜日 午前９時５分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English