12
Names of Things and What They Do
fig.00-020
1.
D BEAM
Switches the D Beam on and off. You can add a variety of
effects to your sounds by moving your hand or the guitar neck
within the range of the beam. (p. 76)
• PITCH Button
In addition to changing the pitch of the guitar, this can be
used for the Freeze function, which continuously holds
the guitar’s tone.
• FILTER Button
This changes the guitar’s tone.
• ASSIGNABLE Button
Use this to assign different parameters and functions to
the D-Beam and change the tone in real time.
2.
LCD
Various information regarding the VG-99 is indicated here.
3.
PATCH/VALUE Dial
Used to switch patches and change settings values.
4.
CATEGORY Button
Used to select and change categories.
5.
FUNCTION Knob
Changes the value of the setting for the parameter indicated in
the LCD.
6.
FUNCTION Buttons
Used to select the parameters indicated in the LCD.
7.
ALTERNATE TUNING Button
Sets the Alternate Tuning function. (p. 26)
8.
MODELING TYPE Buttons
These set the COSM guitar type and tone. (p. 25)
9.
POLY FX (Poly Effects) Buttons
These set the poly effects. (p. 31)
10.
FX (Effects) Buttons
These set the effects. (p. 31)
11.
COSM AMP Buttons
Used to make settings for the COSM amp. (p. 30)
12.
MIXER Buttons
Used to make settings for the mixer. (p. 35)
13.
DELAY/REVERB Button
Used to make settings for the mixer section’s delay and
reverb. (p. 35)
14.
DYNAMIC Button
Used for setting the dynamics. (p. 36)
Top Panel
3
4
30
7
8 9
10 11 12
13 14
15
16
17
18
19
20 21 22
27
29
23 24
28
25
26
33
31
32
1 2
5
6
VG-99_e.book 12 ページ ２００７年７月５日 木曜日 午前９時２２分
To Next Page
Loading...
Need help?
General
