39
Chapter 3
Chapter 3 Creating Your Own Effect
Types (CUSTOMIZE)
The Customize function allows you to make even more detailed
changes to settings for COSM AMP (Preamp section, Speaker
section), Overdrive/Distortion, and Pedal Wah, just like designing
your own original effects processors.
1.
Press [COSM AMP].
The COSM AMP Edit screen appears.
2.
Press PAGE [ ] to display Page 1.
fig.01-060d
3.
Select CUSTOM as the PREAMP TYPE with
[F2] (SELECT) or the F2 knob.
fig.01-060d
4.
Press PAGE [ ] to display Page 2.
5.
Select the basic preamp type to customize
with [F1] (SELECT) or the F1 knob.
6.
Press PAGE [ ] to display Page 3.
7.
Adjust the desired parameter with [F1]–[F6] or
with the F1–F6 knobs.
If there are other parameters you want to adjust, press PAGE
[].
8.
Repeat Steps 5–7 as needed.
For detailed information on all the parameters, refer to
“COSM AMP”
(p. 140).
9.
If you want to save the edited settings,
perform the Write procedure (p. 38).
* If not saving the settings, press [EXIT] to return to the Play screen.
Customizing the Preamp
VG-99_e.book 39 ページ ２００７年７月５日 木曜日 午前９時２２分
To Next Page
Loading...
Need help?
General
