4
Overview of the WM-1/WM-1D
WM-1
(Connected to MIDI Connector)
The WM-1 is a wireless MIDI adaptor.
It is used by connecting it to a device that is equipped with MIDI
connectors.
5 Direct connection between hardware products
5 Stable synchronization with multiple connections
5 Low 3 ms latency
MEMO
The WM-1D is required for wireless MIDI communication with a
Windows computer that does not support BLE MIDI.
Connections
Connect the WM-1 to your MIDI device’s MIDI connectors (IN, OUT).
WM-1D
(Connect to USB Port)
The WM-1D is a wireless MIDI dongle.
To use it, connect it to your computer.
Other than its connectors and power supply, it has the same
performance as the WM-1 (WM-1 + USB MIDI interface).
5 Direct connection between hardware products
5 Stable synchronization with multiple connections
5 Low 3 ms latency
5 Operates on USB bus power
Connections
Connect the WM-1D to a USB port of your computer.
The WM-1/WM-1D transmits and receives MIDI messages wirelessly.
Using the WM-1/WM-1D allows wireless MIDI communication with your MIDI device, computer, tablet, or smartphone.
By using the WM-1D with a Windows computer that does not support BLE MIDI, you can also use a wireless MIDI connection on a Windows system.
What is BLE MIDI?
This is technology that uses Bluetooth LE to transmit and receive MIDI messages wirelessly.
It is ocially known as “MIDI over Bluetooth Low Energy.”
To Next Page
Loading...
Need help?
General
