Royal Enfield Himalayan User Manual

Royal Enfield Himalayan
70
STARTING
 To shift into neutral, move the motorcycle back and
forth gently, while simultaneously shifting the gear.
Ensure gear is in neutral position and the neutral lamp
is glowing in the instrument cluster.
 Turn ignition key to ON position and engine kill switch
on right hand side handle bar to run position.
 When both the ignition and engine kill switch is in “ON”
position and after the vehicle is started, the MIL will
glow for a few seconds and turns “OFF”, this indicates
that all the function of the electronic fuel injection (EFI)
system is functioning normally. In the event of any
malfunction in the EFI system the MIL will glow contin-
uously.

Royal Enfield Himalayan Specifications

General

Engine Type	Single Cylinder, 4 stroke, Air cooled, SOHC
Displacement	411 cc
Max Power	24.3 bhp @ 6500 rpm
Max Torque	32 Nm @ 4000 - 4500 rpm
Fuel System	Electronic Fuel Injection
Transmission	5-speed constant mesh
Front Suspension	Telescopic, 41 mm forks, 200 mm travel
Rear Suspension	Monoshock with linkage, 180 mm wheel travel
Front Brake	300 mm disc, 2-piston floating caliper
Fuel Tank Capacity	15 liters
Seat Height	800 mm
Ground Clearance	220 mm
Kerb Weight	199 kg
Bore x Stroke	78 mm x 86 mm
Compression Ratio	9.5:1
Clutch	Wet, multi-plate
Frame Type	Half-duplex split cradle frame
Tyre Size (Front)	90/90 - 21
Tyre Size (Rear)	120/90 - 17
Wheelbase	1465 mm
Rear Brake	240mm disc, single-piston floating caliper
ABS	Dual Channel ABS (Switchable)