Ruijie RG-AP720-I User Manual

2) Align the square feet on the rear of the AP with the mounting holes on the bracket, slide the AP in the direction
against the arrow on the mounting bracket until it clicks into place.
Figure 4-8 Mounting the AP on the Bracket
 Removing the Access Point
1) If the AP is locked, insert the key to the bottom of a lock slot, and drive the AP in the corresponding direction as
shown in Figure 4-9. If the AP clicks into place and the key cannot be pulled out, it indicates that the AP is unlocked.
If not, keep trying on another lock slot until you succeed.
Figure 4-9 Inserting the Key for Unlocking
2) If the AP is installed on the wall, hold the AP with both of your hands and push it upward to separate it from the
bracket.
Figure 4-10 Removing the Wall-Mount AP

Ruijie RG-AP720-I Specifications

General

Brand	Ruijie
Model	RG-AP720-I
Category	Wireless Access Point
Language	English