Ruijie RG-AP720-I User Manual

3 Button and LED Indicators
The LED indicator is on the top plate, and works after you power on the device.
You can also configure the Silent time on the AC/AP.
Table 3-1 Button and LED Indicators on RG-AP720-I in the Fit mode
Table 3-2 Button and LED Indicators on RG-AP720-I in the Fat mode
State
Frequency
Meaning
Off
N/A
The AP is powered off. Or the AP is in Silent mode (it can be
switched via software).
Fast blinking
green
3Hz
Initialization in progress.
Fast blinking
red
3Hz
Initialization is complete. The Ethernet link is down.
Fast blinking
blue
3Hz
Initialization is complete. The CAPWAP connection is being
established.
Solid blue
N/A
AP is operational. The CAPWAP connection is established. No
clients are associated.
Blinking blue
One flash every 3 seconds
AP is operational. The CAPWAP connection is established. At
least one client is associated.
Solid red
N/A
MCU is being upgraded.
Blinking red
Two flashes every 3 seconds
AP is being located.
State
Frequency
Meaning
Off
N/A
The AP is powered off. Or the AP is in Silent mode (it can be
switched via software).
Fast blinking
green
3Hz
Initialization in progress.
Fast blinking
red
3Hz
Initialization is complete. The Ethernet link is down.
Fast blinking
blue
3Hz
Initialization is complete. The Ethernet link is up.
Solid blue
N/A
AP is operational. No clients are associated.
Blinking blue
One flash every 3 seconds
AP is operational. At least one client is associated.
Solid red
N/A
MCU is being upgraded.
Blinking red
Two flashes every 3 seconds
AP is being located.

Ruijie RG-AP720-I Specifications

General

Brand	Ruijie
Model	RG-AP720-I
Category	Wireless Access Point
Language	English