PROGRAMME I.F.R.
The IFR is an innovative patented system of positive quick cooling which allows the
cycle optimisation for each type of foodstuffs by preventing superficial freezing.
Temperatures are detected by a three-sensor multipoint needle probe. The position
inside the foodstuff is determined univocally by a reference disk located along the needle. (ref. par. “Core
probe”).
1. Select the desired cycle by rotating the
knob
SOFT -18°C
HARD -18°C
MENU
INFINITY
SOFT +3°C
HARD +3°C
IFR
2. Press the knob to activate the selected
cycle
During the cycle it is possible:
- select SET to change the fan speed
- to stop the cycle by selecting STOP
Note: the modified value will only be saved for the
cycle in progress
SOFT -18°C
HARD -18°C
MENU
INFINITY
SOFT +3°C
HARD +3°C
IFR
--
IFR
100%
+27°C
+24°C
SET STOP
3. Cycle ended, automatic conservation
phase
During conservation it is possible:
- to view and modify the default parameters by
selecting SET (see page 40)
- to activate a manual defrost by selecting
- to stop the cycle by selecting STOP
Note: the modified parameters will be saved
only for the cycle in progress.
If not required, manual defrosting is not
performed
--
END CYCLE
CONSERVE
100%
+27°C
+24°C
SET STOP
To Next Page
Loading...
Need help?
General
