After Power on, the thermostat will operate in Normal mode
•
The set point temperature is reset to the default setting
•
The room temperature display is updated within 5 seconds
•
The control process starts
•
The programme number is updated to indicate the running program
If the Reset Button is pressed, the RT500 will behave in the same way as
described above, except that any previously saved user settings stored in
the internal memory will be deleted and overwritten with the default
settings, and all control settings will be returned to default values.
USER INTERFACE AND CONTROLS
The status and operation of the RT500 is clearly shown on the large
backlit Liquid Crystal Display (LCD).
This display allows the user a clear indication of the current room
temperature, and the status of the heating system.
There are few user controls for the RT500, making this thermostat
very easy to operate. These controls are shown below, along with a
description of each of their functions.
RT500 INSTRUCTION MANUAL
8
To Next Page
Loading...
Need help?
General
