63
HDMI Black Level
Selects the black level on the screen to adjust the screen depth.
•
Normal / Low
―
This function is only available when the input signal, connected to the product via an HDMI or DVI
connector, is set to RGB444.
Film Mode
This mode is suitable to view movies.
Sets the product to automatically sense and process film signals from all sources and adjust the picture
for optimum quality.
•
Off / Auto1 / Auto2
―
Available in TV, AV, Component (480i / 1080i), HDMI (1080i).
Auto Motion Plus
―
EDE, EME models are only supported.
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer
picture.
The menu names may vary depending on the country.
Off : Switches Auto Motion Plus off.
Clear : Sets Auto Motion Plus to Clear (suitable for viewing moving images clearly) mode.
Standard : Sets Auto Motion Plus to Standard mode.
Smooth : Sets Auto Motion Plus to Smooth (suitable for viewing moving images naturally) mode.
Custom : Use to reduce the afterimage and judder as much as you want.
•
Blur Reduction : Use to reduce the afterimage as much as you want.
-
This is only supported if the Auto Motion Plus is set to Custom.
•
Judder Reduction : Use to reduce the judder as much as you want.
-
This is only supported if the Auto Motion Plus is set to Custom.
•
LED Clear Motion : Make moving images look more clear.
-
This is only supported if the Auto Motion Plus is set to Custom.
•
Reset: Restore Auto Motion Plus settings to default values.
-
The color on screen may vary with this option unintentionally.
-
Disabled when PIP is set to On.
―
This function may differ depending on the model.
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current
conditions.
•
Off / On
―
The Dynamic Backlight is not available when the input source is set to PC while Video Wall is On.
To Next Page
Need help?
General
