Samsung ES60 User Manual

37
ISO
[Auto] : The camera's sensitivity is
automatically changed by
variables such as lighting value
or subject brightness.
[ISO 80, 100, 200, 400, 800, 1600] :
You can increase the shutter speed while
the same amount of light is present, by increasing the ISO sensitiv-
ity. However, the image may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to
light and therefore the greater its capacity to take pictures in dark
conditions. However, the noise level in the image will increase as
the ISO value increases, making the image appear coarse.
Ä
When [Motion Capture] is set, ISO speed will be set to Auto.
Ä
[ISO] is enabled only in [Program] or [Photo Help Guide] mode.
You can select the ISO sensitivity when taking pictures.The speed or
specifi c light-sensitivity of a camera is rated by ISO numbers.
Functions ( )
ISO
Adjust the sensitivity of the camera.
Back Move
Face Detection
Adjust face detection settings.
Back Move

Normal
Ä
Selectable modes: Auto, Program, DIS, Photo Help Guide,
Beauty Shot, Portrait, Children, Beach & Snow
1. The size and position of the auto
focus frame is set at the face of the
subject automatically.
2. Press the shutter button halfway.
The focus frame turns to green
when the focus is activated.
3. Press the shutter button fully to take
a picture.
Face Detection
If you use face detection options, your
camera can detect a human face. When
focusing on a human face, the brightness
of the face is also adjusted. You can also
capture natural facial expressions by using
self portrait.
[Off] : Face detection is not active.
[Normal] : This mode detects the face position of the subject
automatically and then sets the focus and exposure.
Select this mode for quick and easy face picture.
[Self-Portrait] : When taking pictures of yourself, the area of your
face is automatically detected so that you can take
self pictures more easily and quickly.

Samsung ES60 Specifications

General

Megapixel	12.3 MP
Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Image sensor size	1/2.33 \
Maximum image resolution	4000 x 3000 pixels
Still image resolution(s)	1024 x 768, 1800 x 1200, 1920 x 1080, 2048 x 1536, 2592 x 1728, 2592 x 1944, 3264 x 2448, 3968 x 2232, 3984 x 2656
Digital zoom	3 x
Focal length range	6.3 - 18.9 mm
Digital SLR	No
Minimum RAM	256 MB
Minimum processor	Pentium III, PowerG3
Power supply type	DC
Aperture range (F-F)	3.2 - 5.8
Effective sensor resolution	12.2 pixels
Minimum storage drive space	250 MB
Minimum system requirements	USB CD-ROM
Compatible operating systems	Windows 2000/XP/Vista
Focal length (35mm film equivalent)	35 - 105 mm
Focus	TTL
Focus adjustment	Auto
Normal focusing range	0.8 m
Auto focusing (AF) modes	Centre weighted Auto Focus
Macro focusing range (tele)	0.5 - 0.8 m
Macro focusing range (wide)	0.1 - 0.8 m
Normal focusing range (wide)	0.8 - ∞ m
Light metering	Centre-weighted, Spot
Flash modes	auto, fill-in, Flash off, Red-eye reduction, Slow synchronization
Flash range (tele)	0.5 - 2 m
Flash range (wide)	0.2 - 3.75 m
Flash recharging time	4 s
Internal memory	11 MB
Compatible memory cards	sd, sdhc
Maximum memory card size	8 GB
Motion JPEG frame rate	30 fps
Video formats supported	AVI
Maximum video resolution	640 x 480 pixels
Display diagonal	2.5 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Gray
Scene modes	Backlight, beach, Children, Close-up (macro), Documents, dusk, Fireworks, Night, Portrait, self-portrait, Sunset, Landscape (scenery)
Image editing	resizing, rotating, trimming
Photo effects	Negative film, Vivid
White balance	auto, Cloudy, custom modes, daylight, Fluorescent, Incandescent
Camera playback	movie, single image, slide show
Battery type	SLB-10A
Power requirements	4.2 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 85 %

Weight and Dimensions

Depth	21.6 mm
Width	90.4 mm
Height	59 mm
Weight	116 g