Shooting options
39
Using the timer
Learn how to set the timer to delay shooting.
3
Press [Shutter] to start the timer.
• The AF-assist light/timer lamp blinks. The camera
automatically takes a photo at the specified time.
• Press [ ] or [Shutter] to cancel the timer.
• Self timer options are not available if you set continuous options.
• Depending on the face detection option you have selected, the timer
function or some timer options may not be available.
1
In Shooting mode, press [ ].
Off
2
Select an option.
Option Description
Off: The timer is not active.
10 Sec: Takes a photo in 10 seconds.
2 Sec: Takes a photo in 2 seconds.
Double: Takes a photo in 10 seconds, and then takes
another 2 seconds later.
Motion Timer: Detects the subject's movement, and
then takes a photo if the subject become idle in 6
seconds. (p. 40)
The options may differ depending on the shooting mode.
To Next Page
Loading...
