Inserting/ejecting a memory card (not supplied)
To insert a memory card
1
Slide, and then open the memory card cover as shown in
the figure.
2
Insert the memory card into the card slot until it softly clicks.
•
Make sure that the label portion of the card is facing up and the
camcorder is placed as shown in the figure.
3
Close the memory card cover.
To eject a memory card
1
Slide, and then open the memory card cover as shown in
the figure.
2
Gently push the memory card to eject it.
3
Close the memory card cover.
• To avoid the data loss, turn off the camcorder by pressing and holding the [Home ( )] button before inserting or ejecting the memory card.
• Be careful not to push the memory card too hard. The memory card may suddenly pop out.
To Next Page
Loading...
Need help?
General