Shooting Functions
Set the shooting interval, the number of shots, and shooting start time.
Use this function to capture photos at regular intervals during an event,
such as a lunar eclipse or a sunrise.
To capture an
interval shot,
In Shooting mode, press [m]
ĺ
b
ĺ
Interval Capture
ĺ
set a shooting interval, the number of shots, and shooting
start time
ĺ
Start Interval Capture
ĺ
wait for shooting to
begin at the time you set. (If you did not set a shooting start
time, press [Shutter] to capture the photo.)
To save interval shots as a video, select Time Lapse
ĺ
On. The camera
records a UHD video up to 60 seconds long at a rate of 10 fps. When using the
Time Lapse function, you can set the count to less than 600 shots.
If you set the interval count to more than 600 shots or there is not enough
space on the memory card after the Time Lapse function has been set, the
interval count will change automatically to allow you to use the Time Lapse
function.
Touch to pause while capturing photos.
Touch to resume.
Touch or press [m] to stop capturing.
Use a shutter release cable with a tripod to minimize camera movement
when capturing interval shots.
Connect the power cable if the shooting interval is long or the number of
shots to be taken is high.
If the shooting interval is set to between one minute and 10 minutes, the
camera will enter Display save mode after it starts to capture a photo. If a
shooting interval exceeds 10 minutes, the camera will enter Power save mode
and turn on and capture a photo automatically at the next interval. Press
[Shutter] to cancel Power save mode.
If the battery or memory card is removed while capturing photos, shooting
will stop. Before removing the battery or memory card, interval shooting
must be paused and the camera must be turned o.
Interval Capture
To Next Page
Loading...
Need help?
General
Weight and Dimensions
