200
Appendix
Updating the firmware
Connect the camera to the computer and update the rmware of the
camera or the lens.
You cannot run a rmware update without a fully charged battery. Recharge
the battery fully before running a rmware update.
If you update the rmware, user settings and values will be reset. (Date, time,
language, and video out will not change.)
Do not turn the camera o while the update is in progress.
1
Turn o the camera.
2
Connect your camera to the computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your les. The manufacturer is not
responsible for any loss of data.
If you try to plug the USB cable into the HDMI port, the camera may not
work properly.
3
Turn on the camera.
4
On the computer, select i-Launcher
ĺ
Software Update.
(p. 197)
5
Follow the on-screen instructions to download the rmware to
the camera.
You can download the rmware of the camera or the lens.
6
Turn o the camera when the download completes.
7
Remove the USB cable.
8
Turn on the camera.
9
Press [m]
ĺ
q
ĺ
Device Information
ĺ
Software
Update
ĺ
Body Firmware or Lens Firmware
.
10
Select Update in the pop-up window on the camera to
update the rmware.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
