My Camera > Shooting modes
72
Capturing panoramic photos
In Panorama mode, you can capture a wide panoramic scene in a single
photo. Panorama mode captures and combines a series of photos to create
a panoramic image.
1
Rotate the mode dial to s, and then select Panorama.
2
Press and hold [Shutter] to start shooting.
3
With [Shutter] pressed, slowly move the camera in the
direction you selected.
An arrow pointing in the direction of motion is displayed, and the
entire shooting image is displayed in the preview box.
When the scenes are aligned, the camera captures the next photo
automatically.
4
When you are nished, release [Shutter].
The camera will automatically save the shots into one photo.
If you release [Shutter] while shooting, the panoramic shooting
stops and photos that have been captured are saved.
The resolution varies depending on the panoramic photo you captured.
In Panorama mode, some shooting options are not available.
The camera may stop shooting due to the shooting composition or the
subject’s movement.
In Panorama mode, the camera may not capture the entire scene if you
stop moving the camera when the end of the scene appears in the camera's
screen. To capture the entire scene, move your camera slightly beyond the
point where you want the scene to end.
For best results when capturing panoramic photos, avoid the following:
-
moving the camera too quickly or too slowly
-
moving the camera too little to capture the next image
-
moving the camera at irregular speeds
-
shaking the camera
-
shooting in dark places
-
capturing moving subjects nearby
-
shooting conditions where the brightness or color of light is changing
Photos taken are automatically saved, and shooting is stopped under the
following conditions:
-
If you change the shooting direction while shooting.
-
If you move the camera too rapidly.
-
If you do not move the camera.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
