41
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2, HDMI IN 3
Connection Using an DP Cable
DP IN 1 (UHD 60Hz),
DP IN 2 (UHD 60Hz), DP IN 3 (UHD 30Hz)
•
Precautions for using DP
―
Some graphics cards that are not compliant with the DP standard may prevent the Windows
Booting/Bios screen from being displayed when the product is in power-saving mode. If this is
the case, make sure to turn on the product first before turning on your PC.
―
The interface DP IN 1 (UHD 60Hz), DP IN 2 (UHD 60Hz), DP IN 3 (UHD 30Hz) on the product
and the provided DP cable are designed based on the VESA standards. Using a DP cable that is
not VESA compliant may cause the product to function improperly. Samsung Electronics shall not
be held responsible for any issues from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
―
To use the optimal resolution (3840x2160 @ 60Hz) when the input source is DisplayPort1 or
DisplayPort2, using a DP cable shorter than 5m is recommended.
―
Disabling power-saving mode when the input source is DisplayPort1, DisplayPort2 or
DisplayPort3 may import new resolution information and reset the task window size or location.
To Next Page
Loading...
Need help?
General
