80
Timer
You can set the timer for Screen Protection.
The Screen Protection feature stops automatically after a specified period of time.
•
Timer (Off / Repeat / Interval)
-
Off
-
Repeat: Display the anti-burn in pattern at a specified interval.
-
Interval: Display the anti-burn in pattern for a specified period of time (from the starting to finishing time).
―
When Clock Set is configured, Interval will be enabled.
―
Period, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.
•
Period: Specify the time interval to activate the Screen Protection function.
―
The option is enabled when Repeat is selected for Timer.
•
Start Time: Set the start time to activate the screen protection function.
―
The option is enabled when Interval is selected for Timer.
•
End Time: Set the end time to deactivate the screen protection function.
―
The option is enabled when Interval is selected for Timer.
To Next Page
Loading...
Need help?
General
